Compatible Replacement Chip for Toshiba E-Studio 338/388/CP/CS (non-OEM) 

The chip resets the toner cartridge, so you can refill it and use it for another lifetime.

Its compatible with these models. 

There is a killer chip. It locks out and stops you printing. You must replace it each time you refill to reset the cartridge and restore full functionality. It may also be used with the Starter Cartridge. 

Specific instructions included - Fits in place of the original in the chip holder on front of the cartridge.  The screw holding the chip in place now has a Torx head. You will need a small Torx driver.

Its for all regions of the world.

Available for the Black, Cyan, Magenta or Yellow, or as a Rainbow Pack with each of the four colours.

Please note you also need the correct toner powder for use with this model. These are the chips only but toner bottles are available at TonerTopUp. The cartridge must be full of toner when you install the new chip or it will be useless.

Environmentally friendly!  Refilling cartridges saves raw materials, landfill waste, energy and CO2 emissions.

Save money! Refilling with high quality compatible toner and re-chipping gives excellent results and costs much less than buying an original cartridge.

Important! Ensure that your printer model, cartridge number and region match the details below.

• Product Name: Toshiba E-Studio 338CS Type Chip
• Compatible Models: See above list.
• Cartridge No.: T-FC338EK-R /24B7316 /6B0000000922 /6B0000000920 Black, T-FC338EC-R /24B7313 /6B0000000924 Cyan, T-TFC338EM-R /24B7315 /6B0000000927 Magenta, T-FC338EY-R /24B7314 /6B0000000925 Yellow
• Page Yield/Capacity: Up to 9000 pages Black or 6,000 and Colour at 5% nominal coverage
  
• Condition: New compatible
• Region: WW| Learn more
• Function: Resets the toner cartridge to enable and refilling or re-manufacturing.